Digitone II Mods / destinations

Modulation Destinations

Open thirteen more Digitone II parameters to LFO and modulation control. Select your firmware file. Then download a signed image.

Make sure that you can go back to stock before you flash a modified file. The Early Start-up Menu flashes the stock firmware over MIDI. Do this one time with the stock file, before you flash a modified file. Back up your +Drive. No tool here can recover it.

Go to 1.11 from 1.10E. If your unit has OS 1.10D, install the stock OS 1.10E first. Then install OS 1.11, stock or modified. Do not go from 1.10D directly to 1.11.

Version and changes

This mod is at v1.0.0. What changed in each version, newest first.

v1.0.0
  • First numbered version.

Combines with

The table below is the row of this mod in the compatibility table. dnfw mods matrix generates it.

✓: you can combine the two mods in either order. ✓*: you can combine them in one order only. ✗: you cannot combine them. To see the reason, put the pointer on a cell.

Nobody has flashed a combined image with this mod yet.

arpmodesarpplocksarpscalebootscreendegreetransposedirectjumpfxmodlayermidilfo4lfolengthlfowavesmidiarpmoddestreloadconfirmsendloopsongguardtransientsusbprobewaverider
More modulation destinations moddest✓✓✓✓✓✓✓✓✓*✓✓✓—✓✓✓✓✓✓

This mod combines with Arpeggiator SHUF and RAND, Arpeggiator p-locks, Arp offsets in scale, Boot screen, Degree transpose, Direct jump, LFO modulation of the FX, Layering onto MIDI tracks, LFO ONE/HALF fix, New LFO waveforms, Arpeggiator on MIDI tracks, Reload confirm, Send loop, Song guard, FM drum transients, USB SysEx probe (diagnostic) and Waverider, a sixth machine. This mod combines in one order only with A fourth LFO (moddest must be applied first). See the compatibility table.

1

Your firmware

A Digitone II OS .syx from Elektron. Nothing is modified until you ask.

or drag it here