Digitone II Mods / reload confirm
FUNC + NO reloads the pattern at once, and one stray press loses the work since your last save. With this mod it can ask first. Switch it on in SETTINGS > PERSONALIZE, and off again when you perform. Select your firmware file. Then download a signed image.
Make sure that you can go back to stock before you flash a modified file. The Early Start-up Menu flashes the stock firmware over MIDI. Do this one time with the stock file, before you flash a modified file. Back up your +Drive. No tool here can recover it.
Go to 1.11 from 1.10E. If your unit has OS 1.10D, install the stock OS 1.10E first. Then install OS 1.11, stock or modified. Do not go from 1.10D directly to 1.11.
This mod is at v1.0.0. What changed in each version, newest first.
The table below is the row of this mod in the
compatibility table. dnfw mods matrix generates it.
✓: you can combine the two mods in either order. ✓*: you can combine them in one order only. ✗: you cannot combine them. To see the reason, put the pointer on a cell.
arpmodes | arpplocks | arpscale | bootscreen | degreetranspose | directjump | fxmod | layermidi | lfo4 | lfolength | lfowaves | midiarp | moddest | reloadconfirm | sendloop | songguard | transients | usbprobe | waverider | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Reload confirm reloadconfirm | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | — | ✓ | ✓ | ✓ | ✓ | ✓ |
This mod combines with Arpeggiator SHUF and RAND, Arpeggiator p-locks, Arp offsets in scale, Boot screen, Degree transpose, Direct jump, LFO modulation of the FX, Layering onto MIDI tracks, A fourth LFO, LFO ONE/HALF fix, New LFO waveforms, Arpeggiator on MIDI tracks, More modulation destinations, Send loop, Song guard, FM drum transients, USB SysEx probe (diagnostic) and Waverider, a sixth machine. See the compatibility table.
Use a Digitone II OS 1.11 .syx file from Elektron. To combine mods, you can
also use an image that a different page here built (refer to the table above).
or drag it here