Digitone II Mods / LFO waves

LFO Waves

Seven new LFO waveforms for the Digitone II, with three wavetables you can keep or replace with your own. Select your firmware file and your tables. Then download a signed image.

Make sure that you can go back to stock before you flash a modified file. The Early Start-up Menu flashes the stock firmware over MIDI. Do this one time with the stock file, before you flash a modified file. Back up your +Drive.

Go to 1.11 from 1.10E. If your unit has OS 1.10D, install the stock OS 1.10E first. Then install OS 1.11, stock or modified. Do not go from 1.10D directly to 1.11.

Version and changes

This mod is at v1.0.1. What changed in each version, newest first.

v1.0.1
  • On the MOD page, the glyph of a new waveform now mirrors left to right when SPD is negative, and turns upside down when DEP is negative, as the factory waveforms do.
  • With LFO4 installed, SPH on the LFO4 page now shows its new name on the new waveforms, for example POS on WTB1.
v1.0.0
  • First numbered version.

Combines with

The table below is the row of this mod in the compatibility table. dnfw mods matrix generates it.

✓: you can combine the two mods in either order. ✓*: you can combine them in one order only. ✗: you cannot combine them. To see the reason, put the pointer on a cell.

One combination with this mod passed on an instrument: lfowaves, bootscreen and lfo4 (2026-09-30).

arpmodesarpplocksarpscalebootscreendegreetransposedirectjumpfxmodlayermidilfo4lfolengthlfowavesmidiarpmoddestreloadconfirmsendloopsongguardtransientsusbprobewaverider
New LFO waveforms lfowaves✓✓✓✓✓✓✓✓✓*✓—✓✓✓✓✓✓✓✓

This mod combines with Arpeggiator SHUF and RAND, Arpeggiator p-locks, Arp offsets in scale, Boot screen, Degree transpose, Direct jump, LFO modulation of the FX, Layering onto MIDI tracks, LFO ONE/HALF fix, Arpeggiator on MIDI tracks, More modulation destinations, Reload confirm, Send loop, Song guard, FM drum transients, USB SysEx probe (diagnostic) and Waverider, a sixth machine. This mod combines in one order only with A fourth LFO (lfowaves must be applied first). See the compatibility table.

1

Your firmware

An unmodified Digitone II OS 1.11 .syx from Elektron.

or drag it here