Digitone II Mods / layering to midi

Layering to MIDI

Layer an audio track onto MIDI tracks with TRACK WILL TRIGGER. The MIDI tracks then play along over MIDI: every note, chord and release that your audio track plays. Select your firmware file. Then download a signed image.

Make sure that you can go back to stock before you flash a modified file. The Early Start-up Menu flashes the stock firmware over MIDI. Do this one time with the stock file, before you flash a modified file. Back up your +Drive. No tool here can recover it.

Go to 1.11 from 1.10E. If your unit has OS 1.10D, install the stock OS 1.10E first. Then install OS 1.11, stock or modified. Do not go from 1.10D directly to 1.11.

Version and changes

This mod is at v1.0.0. What changed in each version, newest first.

v1.0.0
  • First numbered version.

Combines with

The table below is the row of this mod in the compatibility table. dnfw mods matrix generates it.

✓: you can combine the two mods in either order. ✓*: you can combine them in one order only. ✗: you cannot combine them. To see the reason, put the pointer on a cell. Flashed together and confirmed on the instrument: this mod with the Boot screen (2026-10-02).

arpmodesarpplocksarpscalebootscreendegreetransposedirectjumpfxmodlayermidilfo4lfolengthlfowavesmidiarpmoddestreloadconfirmsendloopsongguardtransientsusbprobewaverider
Layering onto MIDI tracks layermidi✓✓✓✓✓✓✓—✓✓✓✗✓✓✓✓✓✓✓

This mod combines with Arpeggiator SHUF and RAND, Arpeggiator p-locks, Arp offsets in scale, Boot screen, Degree transpose, Direct jump, LFO modulation of the FX, A fourth LFO, LFO ONE/HALF fix, New LFO waveforms, More modulation destinations, Reload confirm, Send loop, Song guard, FM drum transients, USB SysEx probe (diagnostic) and Waverider, a sixth machine. This mod does not combine with Arpeggiator on MIDI tracks (refused by hand: they fight over one feature). See the compatibility table.

1

Your firmware

Use a Digitone II OS 1.11 .syx file from Elektron. To combine mods, you can also use an image that a different page here built (refer to the table above).

or drag it here

Not with the MIDI Arpeggiator

MIDI Arpeggiator also turns layered notes on MIDI tracks into MIDI, when the MIDI track's own arp is on. The two no longer share any bytes, but until that overlap is checked they are kept apart: they cannot be built together.